Programming Menu - Barco Event Master E2 Lite User Manual

EM GUI orientation
Always check for updated information that may have come out since this manual was published and
for the latest version of all documents on www.barco.com.

6.19 Programming Menu

General
The programming page is where the event is set up and everything comes together. Users can define sources
from inputs, assign layers and backgrounds into screens and create User keys and presets and more. Once
programmed and defined this is where the show is played back as well.
Description
Image 6-29: Programming Menu Overview
1 Resources area
2 Workspace / Programming Diagram area
3 Workspace / System wide function
4 Adjustment area
116 R5909934 /00 E2 Lite and EC-40
This area contains the available resources for
programming and playback, as inputs and
sources. Also in this area the still store (logo)
images are shown.
For each destination the Program and Preview
screens can be viewed individually by selecting
the corresponding tab. All Program and
Previews screens can be viewed simultaneously
by selecting the "View All" button.
The space between Program and Preview has
Layouts, a function where a certain group of
destinations can be laid out in the workspace
Layer Alignment adjustments and controls to
manage the Preview/Program screens.
The menus in this area provide control of
parameters for selected layer and source. These
can be modified and managed. This is where
creation of User Keys and presets is done