Programming Menu > Select Thumbnails For Inputs; Programming Menu > Create Sources From Inputs - Barco Event Master E2 Lite User Manual

System Setup
Capacities and limitations
As a reference approximately 50 HD or 12 UHD stills can be stored, if the size of the still is bigger, the memory
allocation increases allowing for less number of stills. Image can be imported as described in the Operation
Section below.
Still Stores can be used in Backgrounds and Layers, but will need to be added from the right section in the
Input Resource tab.
7.18 Programming Menu > Select Thumbnails for
Inputs
General
In this procedure, you will add select thumbnails for the Input sources.
Prerequisite
• Ensure that you are familiar with the Programming Menu. For details on this menu, please refer to
chapter "Programming Menu", page 116.
(Optional) Update thumbnails from the PC memory
1. Click on the Input tab on the top of the left hand side.
2. Click on the thumbnail icon.
Image 7-8
3. Click in the black box next to input name.
4. Navigate the computers file system to find and select the desired thumbnail to be used Select Thumbnails
from the PC memory.
Characteristics and limitations
Images need to be JPG, PNG, BMP or GIF format.
7.19 Programming Menu > Create Sources from
Inputs
General
In this procedure, you will create source files from the Input sources original source file.
Prerequisite
• Ensure that you are familiar with the Programming Menu. For details on this menu, please refer to
chapter "Programming Menu", page 116.
When an Input is created, the software copies the Input to a source. More sources can be created
by following the steps below.
(Optional) Create additional sources
1. Click on the "Input" tab on the top of the left hand side.
2. Click on the List icon.
188 R5909934 /00 E2 Lite and EC-40