Front Panel - Barco Event Master E2 Lite User Manual

Hardware orientation

4.1 Front panel

About the front panel
See Image 4-1 for an illustration of the front panel of the Event Master E2 Lite video processor.
Image 4-1: E2 Lite front panel
1
Barco logo
2
Display screen
3
Menu navigation buttons
Chassis handles
Two Chassis Handles are provided for ease of installation and transportation.
When transporting the chassis by its handles, do not set it down with the rear connectors towards
the ground. If you do, you may damage the rear connectors.
Display screen
The 4-line x 24-character screen shows all Event Master processors menus, sub-menus, and messages. The
display is dimmable.
At system startup, or when no menu buttons are selected, the screen displays the Status Menu. The following
illustration shows a sample Status Menu. For information about the contents of this menu, refer to the chapter
titled "Front Panel Menu orientation", page 47.
Image 4-2: E2 Lite display screen
Menu navigation controls
The navigation in the menus is assumed by three controls:
34 R5909934 /00 E2 Lite and EC-40
4
Power ON/OFF button
5
USB port
6
Chassis handles