Barco Event Master E2 Lite User Manual page 136

EM GUI orientation
List of destination:
• 'Destinations:' Provides list of all destinations that are available in the Programming page. Each destination
can be expanded to reveal the Background and the layers assigned to them. The "eye" icon replaces or
removes the layers from the Preview destination. This button works in a toggle mode.
• 'BG and ScreenDest: 'Backgrounds and Destinations layers can be further expanded to reveal the A and B
sources that are used in the transitions.
• 'LEDs:' The LEDs provide an indication of the "A" and "B" backgrounds or sources.
Note that there is no A or B side of the scaler, only A and B usage, all layers are independent of each other
in respect to Z-order.
Image 6-49
Swap Z order rules
There are several rules that apply when changing Z order:
1. Can only swap Z order on layers in the same Destination.
2. Can only swap Z order on layers that are of the same type (2K / DL / 4K).
How to swap Z order
1. Click on Swap Z order button to enter in the Swap Z order mode.
2. Click on 1 layer at a time and move it to a different location.
How to access the layer adjustments
Adjustments to layers are performed in the "Adjust" panel:
1. Select the layer from the list
or
Select the layer from the preview canvas.
The layer is selected.
136 R5909934 /00 E2 Lite and EC-40
This menu provide:
• A list of the available destinations and the layers
associated with that destination.
• Swap Z order button that allows for layers that are
in the same Destination and of the same type to be
swapped.