About Status Menu; About Setup Menu - Barco Event Master E2 Lite User Manual

Front Panel Menu orientation

5.4 About Status menu

General
The Status Menu is the Event Master series processor's top-level menu, which appears by default at system
startup. This menu provides system name, Unit ID, Genlock status and unit IP address. The following figure
illustrates a sample Status Menu. Press the ESC button when the Setup menu is displayed allows to return in
the Status menu.
Image 5-6: e.g. E2 Status menu
System name
Human readable name of the current system. Particularly useful in the user interface when multiple Event
Master system are connected in the same network.
System1 is the default value. This name can be changed in the configuration page of the GUI. For more
details please refer to the section dedicated to the system configuration in the chapter "Configuration Menu",
page 71.
Unit ID
ID required to identify different units are acting as a single system in order to expand for Inputs, Outputs or
Layers.
This ID can be changed in the configuration page of the GUI. For more details please refer to the section
dedicated to the System configuration in the chapter "Configuration Menu", page 71.
Genlock
This line gives information about the Genlock connection situated at the back of the Event Master unit. For
more detail on this connection please refer to the section dedicated to the Genlock Input BNC in the chapter
"Rear panel", page 35.
The user could turn Genlock OFF or ON in the configuration page of the GUI. The Event Master unit will
determine what kind of Genlock is connected and will update the Status field. The status field can say
"Locked", "Lost Lock" or "Free Run". For more details please refer to the section dedicated to the Event Master
unit configuration in the chapter "System Setup", page 169.
IP address
IP address of the Event Master unit in the local network.
If there is no internet connection, or if a DHCP server has not been found, the IP address is 000.000.000.000.
The IP address is needed for running the Web Interface and for connection to an external device. For more
details please refer to the section dedicated to the setting of Ethernet options in the chapter "About the System
menu", page 53.

5.5 About Setup menu

General
The Setup menu, shown in the following illustration, is the menu from which you access all operational
menus. To display the Setup menu, press the SEL button on the front panel when the Status menu is
displayed, or press the ESC button to go back from a submenu (one level for each time you press the button).
52 R5909934 /00 E2 Lite and EC-40