Barco Event Master E2 Lite User Manual page 179

Image 7-2: Adjust MVR panel—Timing
6. [Connector tab] Select SDI type and Sync standards.
7. [Connector tab] Select Color space and Sample bit depth available as reported from the EDID of the Device.
8. [Connector tab] Change Connector capacity as long as the connector is not included in a Destination.
9. [Connector tab] Select HDCP Mode On or Off.
The default for HDMI outputs is Off. To turn On the HDCP Mode, click on the empty checkbox. When the
checkbox displays a check mark, HDCP Mode is On. HDCP Mode is not applicable to SDI outputs.
System Setup
R5909934 /00 E2 Lite and EC-40 179