Barco Event Master E2 Lite User Manual page 55

Image 5-11
How to restore a system configuration file that is stored on a flash drive
1. Insert a formatted flash drive in the unit's front-panel USB port.
2. From the System menu, scroll to the USB Backup/Restore submenu. Select Restore Config.
The USB Restore Config submenu appears, as shown in the following illustration.
Image 5-12
3. Press SEL and scroll through the list of configuration files. When you locate the file you want, press SEL
again.
4. Scroll to Restore Config and press SEL.
A message confirms the restore operation and instructs you to reboot the Event Master unit.
You must reboot the Event Master unit to use the restored configuration file.
How to create a configuration offline and transfer it to a live unit
When working in the Event Master Toolset Software with a simulator, it is now possible to create a
configuration offline and then transfer it to a live unit.
1. System creation:
1. Create your system offline using the simulator. This includes system configuration, presets, MVR, etc ...
2. Save the simulated configuration.
Press the Save icon (the floppy disk icon in the lower left-hand corner of the screen).
2. Copy the XML file to the USB device:
1. Open Windows File Explorer.
2. Locate and select the Barco folder on your C: drive.
Front Panel Menu orientation
R5909934 /00 E2 Lite and EC-40 55