Programming Menu > Drop Backgrounds Into Screen Destinations; Programming Menu > Drop Sources, Layers Into Screen Destinations & Sources Into Layers - Barco Event Master E2 Lite User Manual

Image 7-9
3. Click on the arrow next the Input name.
4. To copy the raw original source file click on the PLUS in the Input.
5. To copy the source click on the copy icon. This creates a copy of the Source including changes made and
saved.
Image 7-10
(Optional) Rename the Source name
1. Click on the "Input" tab on the top of the left hand side.
2. Click on the List icon.
3. Click on the arrow next the Input name.
4. Double-Click on the Source name that you wish to rename.
5. Type the new name in the blue box.
7.20 Programming Menu > Drop backgrounds into
Screen Destinations
General
In this procedure, you will drop backgrounds into Screen Destinations.
Prerequisite
• Ensure that you are familiar with the Programming Menu. For details on this menu, please refer to
chapter "Programming Menu", page 116.
Drop Backgrounds
1. Click on the "Background" tab on the top of the left hand side.
2. Click on either the thumbnail or list icon.
Image 7-11
3. Click in the thumbnail area, even if it is black, or the listed name and drop it into the destination.
7.21 Programming Menu > Drop Sources, Layers
into Screen Destinations & Sources into layers
General
In this procedure, you will drop sources and Layers into Screen Destinations & Sources into layers.
System Setup
R5909934 /00 E2 Lite and EC-40 189