User Preference Setup; Saving The Setup; Backing Up The System - Barco Event Master E2 Lite User Manual

System Setup
You must reboot the system to use the restored configuration file.
At the conclusion of this procedure, your system is completely set up — exactly the way that you left
it when you performed a complete system "backup." No further setup operations are required.

7.7 User preference setup

General
This procedure enables you to set a variety of important user preferences and options.
Prerequisite
• Ensure that you are familiar with the Black Invalid menu. For details on this menu, please refer to chapter
"System menu > Black Invalid", page 53.
• Ensure that you are familiar with the VFD brightness menu. For details on this menu, please refer to
chapter "System menu > VFD brightness (display brightness)", page 58.
Set a variety of important user preferences
Use the following steps to set user preferences:
1. Select System from the Setup menu.
2. Select Black Invalid from the System menu to set Black on Invalid Video on or off.
3. Select VFD brightness from the System menu to adjust the intensity of the front panel vacuum fluorescent
display (VFD) screen, from 1 (dim) to 6 (bright).

7.8 Saving the setup

General
In this procedure, you will save all system setup parameters to non-volatile memory.
Prerequisite
• Ensure that you are familiar with the Save All function. For details on this menu, please refer to chapter
"Save All", page 64.
Save all system setup parameters
Use the following steps to save all system setup parameters:
1. Select Save All from the Setup menu.
2. Wait a few seconds. When the parameters are saved you are returned to the Setup menu.

7.9 Backing up the system

This step in the Event Master series processor setup procedure is optional. If there is not backup
available or if you decide to configure your unit from scratch, please move to the next step to
continue the procedure.
General
In this procedure, you will restore your system configuration from a USB drive — provided that you previously
backed up your system to a USB drive.
174 R5909934 /00 E2 Lite and EC-40