Barco Event Master E2 Lite User Manual page 111

Data-doubling submenu—Basic Mode
• Canvas H: This is the horizontal size of the
canvas, measured in pixels. The edit box allows
the user to adjust this size.
• Canvas V: This is the vertical size of the canvas,
measured in pixels. The edit box allows the user to
adjust this size.
• Viewable Canvas: Viewable Canvas displays the
horizontal and vertical size of the viewable canvas
in pixels. This is the area that the Outputs cover in
the canvas.
• Data Doubling H or V Overlap width: The
adjustment can be made by moving the slider,
entering the value manually in the box, or clicking
on the plus and minus.
Note: The Overlap sliders are disabled, until at
least one overlapping area is selected. Gray
overlaps are unselected; blue overlaps are
selected. Individual overlaps can be selected by
clicking on the desired overlap in the output image.
All overlaps can be selected by clicking on the
Select All button.
• Once an overlap is created, H and V offset can be
adjusted for Left, Right, or Center justification.
• The icons above the sliders are shortcuts for the
offset.
R5909934 /00
EM GUI orientation
E2 Lite and EC-40 111