Save All - Barco Event Master E2 Lite User Manual

Front Panel Menu orientation
Please refer to the chapter "Settings Menu", page 162 for the instructions on how to perform firmware
upgrades through the USB memory or the web interface.

5.16 Save All

General
Save All on the Setup menu saves your custom configuration parameters in non-volatile memory.
If you save the system state, these parameters are restored the next time you power up the Event Master unit.
If you do not use this function, your custom settings are not restored during the next system power up
sequence.
Saving all modified settings
1. Select Save All from the Setup menu.
The following message appears:
Image 5-32
2. Wait few seconds ...
Parameters are saved in non-volatile memory and you are returned to the Setup menu.
64 R5909934 /00 E2 Lite and EC-40