Table of Contents
Advertisement
2. Hardware Orientation
ImagePRO-II Front Panel
fã~ÖÉmolJff=cêçåí=m~åÉä
2
1
1)
Chassis Handles
2
USB Port
3)
Display Section
8
The figure below illustrates the ImagePRO-II front panel.
4
3
Figure 2-1. ImagePRO-II Front Panel
4)
5)
6)
Following are descriptions of each front panel control feature:
1)
Chassis Handles
Two Chassis Handles are provided for ease of installation and transportation.
2)
USB Port
The USB port is provided to support uploading and downloading system
configurations and logos, and upgrading ImagePRO-II firmware.
3)
Display Section
The Display Section consists of a four-line display screen. Refer to
Section
on page 9 for complete details.
4)
Menu Navigation Section
The Menu Navigation Section includes the ADJUST knob, and two navigation
buttons: SEL and ESC. Refer to
more information.
5)
Menu Access Buttons
The Menu Access Buttons provide quick access to specific locations in the
menu system. Refer to
6)
Input Buttons
The five numbered Input Buttons correspond to the five rear-panel input
connectors. Refer to
7)
LOGO and BLACK Buttons
The LOGO button enables you to capture a stored still image, and transition to
and from the logo. Refer to the
information.
The BLACK button transitions the display image to and from black. Refer to
BLACK Button
6
5
Menu Navigation Section
Menu Access Buttons
Input Buttons
The Menu Navigation Section
Menu Access Buttons
Input Buttons
on page 11 for information about the inputs.
The LOGO Button
on page 11 for details.
8
7
7)
LOGO and BLACK Buttons
8)
FRZ Button
The Display
on page 9 for
on page 10 for complete details.
section on page 11 for more
ImagePRO-II • User's Guide
1
The
Advertisement
Chapters
Table of Contents
