Vii.2 General Considerations; Vii.3 Important Safety Instructions - Barco NGS-D200 User Manual

VII.2 General Considerations

General safety instructions
Before operating this equipment please read this manual thoroughly and retain it for future reference
l
Installation and preliminary adjustments should be performed by qualified Barco personnel or by authorized Barco
l
service dealers
All warnings on the device and in the documentation manuals should be adhered to
l
All instructions for operating and use of this equipment must be followed precisely
l
All local installation codes should be adhered to
l
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1,
UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technology equipment
including electrical business equipment. These safety standards impose important requirements on the use of safety
critical components, materials and insulation, in order to protect the user or operator against risk of electric shock and
energy hazard and having access to live parts. Safety standards also impose limits to the internal and external temperature
rises, radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal
operation fails.

VII.3 Important safety instructions

To prevent the risk of electrical shock
This product should be operated from a mono phase AC power source
l
This apparatus must be grounded (earthed) via the supplied 3 conductor AC power cable. If none of the supplied
l
power cables are the correct one, consult your dealer
If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not
l
defeat the purpose of the grounding-type plug
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. To
l
disconnect the cord, pull it out by the plug. Never pull the cord itself
Use only the power cord supplied with your device. While appearing to be similar, other power cords have not been
l
safety tested at the factory and may not be used to power the device. For a replacement power cord, contact your
dealer.
Do not operate the device with a damaged cord. Replace the cord
l
Do not operate the device if the device has been dropped or damaged - until it has been examined and approved for
l
operation
by a qualified service technician.
l
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces
l
If an extension cord is necessary, a cord with a current rating at least equal to that of the device should be used. A
l
cord rated for less amperage than the device may overheat
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points
l
or short out parts that could result in a risk of fire or electrical shock
Do not expose this device to rain or moisture
l
Do not immerse or expose this device in water or other liquids
l
Do not spill liquid of any kind on this device
l
Should any liquid or solid object fall into the cabinet, unplug the set and have it checked by qualified service
l
personnel before resuming operations
Do not disassemble this device, always take it to an authorized trained service person when service or repair work
l
is required
K5903085
Appendix VII: Safety and Compliance Statements
74