Omron OMNUC W Series Manual page 251

9 Troubleshooting
9
A.ED
A.ED: Command Execution Incomplete Error
Display and Outputs
Alarm Outputs
Alarm Code Outputs
ALO1 ALO2
OFF ON
Note OFF: Output transistor is OFF (alarm state). ON: Output transistor is ON.
Status and Remedy for Alarm
During DeviceNet
communications
Cause
A Command was interrupted.
9-40
ALM Output
ALO3
ON OFF
A
Do not connect a Parameter Unit or start
communications with a personal computer
during command execution.
Remedy