Connection Object (0X05) - Omron OMNUC W Series Manual

10.2.5 Connection Object (0x05)

Class and instances of the Connection Object (0x05) are shown below.
Class
• Attributes: None supported
• Services: None supported
Instances
Attributes (Instance #1: Explicit Message)
No Access Name
1
Get State
2
Get Instance_type
3
Get TransportClass_
trigger
4
Get/Set Produced_
Connection_ID
5
Get/Set Consumed_
Connection_ID
6
Get/Set Initial_Comm_
Characteristics
7
Get Produced_
Connection_Size
8
Get Consumed_
Connection_Size
9
Get/Set Expected_
Packet_Rate
12
Get Watchdog_
Timeout_Action
13
Get Produced_
Connection_
Path_Length
14
Get Produced_
Connection_Path
15
Get Consumed_
Connection_
Path_Length
16
Get Consumed_
Connection_Path
Data Type Description
USINT Defines the state of the object.
USINT Defines either I/O or messaging connection.
Byte Defines behavior of the connection.
UINT Placed in CAN Identifier Field when the connec-
tion transmits
UINT CAN Identifier Field value that denotes message
to be received
USINT Defines the message group across which produc-
tions and consumption associated with this con-
nection occur.
UINT Maximum number of bytes transmitted across
this connection
UINT Maximum number of bytes received across this
connection
UINT Defines timing associated with this connection.
USINT Defines how to handle timeouts.
UINT Number of bytes in the produced connection
path attribute
USINT Specifies the application object whose data is to
Array be sent by this connection object.
UINT Number of bytes in the consumed connection
path attribute
USINT Specifies the application object that are to
Array receive the data received by this connection
object.
10-7
10.2 DeviceNet Attributes
Value
−
0x0000
0x83
−
−
0x21
0x00FF
0x00FF
−
0x03
0x0000
−
0x0000
10
−