P.days - Partial Working Days; T.int - Internal Temperature Of Controller; T.min - Minimum Internal Temperature Of The Controller; T.max - Maximum Internal Temperature Of The Controller - gefran 850 Installation And Instruction Manual

4.4.34. P.DAYS - Partial working days

Acronym
P.DAYS PARTIAL DAYS OF OPERATION
The parameter shows the number of working days of the controller since the last counter reset, Each working day equals
24 hours of actual functioning.
The counter can be reset with the Us.cal function.
Unit of measurement:
Options:

4.4.35. T.INT - Internal temperature of controller

Acronym
T.INT INTERNAL TEMPERATURE
The parameter shows the instantaneous internal temperature of the controller.
Unit of measurement:
Options: -

4.4.36. T.MIN - Minimum internal temperature of the controller

Acronym
T.MIN MIN INTERNAL TEMPERATURE
The parameter shows the minimum internal temperature of the controller measured during work.
Unit of measurement:
Options:
-

4.4.37. T.MAX - Maximum internal temperature of the controller

Acronym
T.MAX MAX INTERNAL TEMPERATURE
The parameter shows the maximum internal temperature of the controller measured during work.
Unit of measurement:
Options: -

4.4.38. TIME - Internal time

Acronym
tiME
The parameter shows the internal time in 24-hour format. Hours, minutes and seconds are shown with scrolling text:
hours, minutes and seconds.
Unit of measurement:
Options: -

4.4.39. DATE - Internal date

Acronym
dAtE
The parameter shows the complete internal date of the controller: month, day, year, day of week, with scrolling text.
Unit of measurement:
Options:
-
Scrolling message
Day
0...9999
Scrolling message
°C
Scrolling message
°C
Scrolling message
°C
Scrolling message
hh:mm:ss
Scrolling message
MM / DD / YYYY
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 65
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R