Bar.e - Enable Bargraph Display On Home Menus; Lang - Selecting Language For Messages - gefran 850 Installation And Instruction Manual

4.27.2. BAR.E - Enable bargraph display on Home menus

Acronym
bAr.E BARGRAPH ENABLE
The parameter enables the display of bargraphs. The parameter appears only if the controller is 1650 or 1850.
Unit of measurement:
Options: OFF
ON.ALL = Enables display of three bargraphs bAr.1, bAr.2 and bAr.3 including frames (default)
NO.FRA = Enables display of three bargraphs bAr.1, bAr.2 and bAr.3 without frames
ON.3LY = Enables display of bargraph bAr.3 only
Only for 1850
ON.AL1 = Enables display of three bargraphs bAr.1, bAr.2 and bAr.3 including frames (default).
NO.FR1 = Enables display of three bargraphs bAr.1, bAr.2 and bAr.3 without frames.
ON.3L1 = Enables display of bargraph bAr.3 only.

4.27.3. LANG - Selecting language for messages

Acronym
LAnG MESSAGE LANGUAGE
The parameter shows and sets the language for the scrolling messages.
Unit of measurement:
Options: LANG1 = Language 1 (English)
LANG2 = Language 2 (Italian)
LANG3 = Language 3
NONE
Scrolling message
-
= Disables display of three bargraphs bAr.1, bAr.2, bAr.3, of IN/OUT frame (only for 1850),
and of figures from 1 to 8 (only for 1850)
Disables display of IN/OUT frame and of figures from 1 to 8
Disables display of IN/OUT frame and of figures from 1 to 8.
Disables display of IN/OUT frame and of figures from 1 to 8.
Scrolling message
-
= No language
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 172
Submenu Attributes
HMI R W
Submenu Attributes
HMI R W