Table of Contents
Advertisement
4.19.4. TYPE - Defining the type of analog output
Acronym
tYPE
OUT.AN.1 (o OUT.AN.2) ANALOG OUTPUT TYPE
The parameter shows and sets the definition of analog output A1 or A2.
Unit of measurement:
Options:
20MA
4-20M
10V
2-10V
C.20MA = 0...20 mA Custom output
C.4-20 = 4...20 mA Custom output
C.10V
C.2-10 = 2...10 V Custom output
4.19.5. FUNC - Selecting the function assigned to the analog output
Acronym
FuNC
OUT.AN.1 (o OUT.AN.2) REFERENCE SIGNAL ANALOG OUTPUT
The parameter shows and sets the function assigned (retransmission of values) to analog output A1 or A2.
Unit of measurement:
Options:
NONE
HEAT1
COOL1
PV1
SSP1
SETP1
DEVI1
SERIA
if the Programmer 1 function is enabled in parameter PROGR on the EN.FUN menu:
SLV.S1
H+C1
if PID2.E function is enabled in EN.FUN:
HEAT2
COOL2
H+C2
PV2
SSP2
SETP2
DEVI2
if the Programmer 2 function is enabled in parameter PROGR on the EN.FUN menu:
SLV.S2
IN1
if the model with auxiliary input:
IN2
if the model with auxiliary input 2:
IN3
if model with Master Modbus serial (except output 1) and at least one Master parameter configured
as GF_eXpress:
MASTER = Master value (for type provided to word only) (index no. to be specified in MAST.N)
Scrolling message
-
= 0...20 mA Output
= 4...20 mA Output
= 0...10 V Output
= 2...10 V Output
= 0...10 V Custom output
Scrolling message
-
= No assigned function
= Heat control power of PID.1
= Cool control power of PID.1
= Process variable 1
= Active setpoint of PID.1
= Local setpoint of PID.1
= Deviation |SSp-PV| of PID.1
= Value set from serial line
= Slaved setpoint of PROGR.1
= PID.1 heat/cool control output
= PID.2 heat control output
= PID.2 cool control output
= PID.2 heat/cool control output
= Process variable 2
= PID.2 active setpoint
= PID.2 local setpoint
= PID.2 deviation |SSp-PV|
= Slaved setpoint of PROGR.2
= Main input
= Auxiliary input
= Auxiliary input 2
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 142
Submenu
Attributes
OUT.AN
R W
Submenu
Attributes
OUT.AN
R W
Advertisement
Table of Contents
