Out2.S - Number Of Switchings Output 2; Out3.S - Number Of Switchings Output 3; Out4.S - Number Of Switchings Output 4; Indg.s - Digital Input Switchings Number - gefran 850 Installation And Instruction Manual

4.4.29. OUT2.S - Number of switchings output 2

Acronym
OUT2.S NUMBER X 1000 RELAY CYCLES
If output 2 is available on the controller, the parameter shows the number of switchings (in thousands).
Unit of measurement:
Options: -

4.4.30. OUT3.S - Number of switchings output 3

Acronym
OUT3.S NUMBER X 1000 RELAY CYCLES
If output 3 is available on the controller, and if it is relay or logic, the parameter shows the number of switchings (in thou-
sands).
Unit of measurement:
Options: -

4.4.31. OUT4.S - Number of switchings output 4

Acronym
OUT4.S NUMBER X 1000 RELAY CYCLES
If output 4 is available on the controller, the parameter shows the number of switchings (in thousands).
Unit of measurement:
Options: -
4.4.32. NDG.S - Digital input switchings number
Acronym
INDG.S NUMBER OF DIGITAL INPUT CYCLES
If a digital input with the F.in=CY.CNT function is configured on the controller, the parameter shows the number of swi-
tchings performed.
Unit of measurement:
Options: -

4.4.33. T.DAYS - Total working days

Acronym
T.DAYS TOTAL DAYS OF OPERATION
The parameter shows total number of working days of the controller since first power-on. Each working day equals 24
hours of actual functioning.
Unit of measurement:
Options:
Scrolling message
Number (× 1000)
Scrolling message
Number (× 1000)
Scrolling message
Number (× 1000)
Scrolling message
Number
Scrolling message
Day
0...9999
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 64
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R