gefran 850 Installation And Instruction Manual page 279

GENERAL DATA
Operating voltage
Power dissipation
POWER SUPPLY
Protections
Connection
Serial configuration port
RS485
(option)
Master Modbus
CONNECTIONS
RTU Bridge
Ethernet Modbus TCP
and Webserver
(option)
Inputs and outputs
Use
Altitude
AMBIENT
Operating temperature
CONDITIONS
Storage temperature
Relative humidity
PROTECTION LEVEL
Positioning
Installation regulations
ASSEMBLY
DIMENSIONS
WEIGHT
EMC
(electromagnetic compatibility)
CE STANDARDS
LVD safety
Programming is done with the GF_eXpress configuration program.
1)
80209C_MHW_850-1650-1850_01-2020_ITA_pag. 277
100...240 VAC/VDC ±10%, 50/60 Hz
(20...27 VAC/VDC ±10%, 50/60 Hz)
12 W max
Overvoltage 300 V / 35 V
Screw terminals and crimp connector, max. wire section 1 mm
Connector: microUSB
Baudrate: 1200, 2400, 4800, 9600, 19.200, 38.400, 57.600, 115.200
bit/s
Protocol: Modbus RTU
Insulation compared to main entrance
Screw terminals and crimp connector, max. wire section 2.5 mm
Baudrate: 1200, 2400, 4800, 9600, 19.200, 38.400, 57.600,
115.200 bit/s
Protocol: Modbus RTU Master
Connettore RJ10
Baudrate: 1200, 2400, 4800, 9600, 19.200, 38.400, 57.600,
115.200 bit/s
Protocol: Modbus RTU Master
Screw terminals and crimp connector, max. wire secti
Baudrate : 10/100BaseTX, 10/100Mbit/s
Protocol : Modbus TCP slave, integrated Webserver
Isolation from other peripherals
Standard RJ45 connector
Screw terminals and crimp connector, max. wire section 2.5 mm
Internal
2000 m max
-10 ... +55 °C (as per IEC 68-2-14)
-20 ... +70 °C (as per IEC 68-2-14)
20...85% RH non condensante (as per IEC 68-2-3)
IP 65 on front panel (as per IEC 68-2-3)
On panel, removable faceplate
Installation category: II
Pollution degree: 2
Isolation: double
96 X 96 mm (1/4 DIN)
Depth: 80 mm
0,24 kg
Conforms to Directive 2014/30/EU norme EN 61326-1
Emissions in industrial environment classe A
Conforms to Directive 2014/35/EU norme EN 61010-1
2
2
on 2.5 mm
2
2