Recp.n - Number Of Parameters Recipes; Alrm.n - Number Of Alarms Enabled; On.of - Enabling Software On/Off; Dig - Defining Type Of Digital Inputs - gefran 850 Installation And Instruction Manual

4.21.5. RECP.N - Number of parameters recipes

Acronym
RECP.N NUM OF PARAMETER RECIPES
The parameter shows and sets the number of parameters recipes for which the template is defined via GF_eXpress.
If the parameter is "0" the parameters recipes are disabled.
Unit of measurement:
Options: 0...5

4.21.6. ALRM.N - Number of alarms enabled

Acronym
ALRM.N NUM OF ENABLE ALARMS
The parameter shows and sets the number of alarms enabled.
No alarm is enabled if the parameter equals "0".
Unit of measurement:
Options: 0...4

4.21.7. ON.OF - Enabling software on/off

Acronym
On.OF SOFTWARE ON/OFF ENABLE
The parameter shows and sets enabling of on/off of the controller's software.
The software ON-OFF function is explained in detail in paragraph "5.8. Switching the software on/off" on page <?>.
Unit of measurement:
Options: ENABL = Controller software on/off enabled
DISAB = Controller software on/off disabled

4.21.8. DIG - Defining type of digital inputs

Acronym
dIG DIGITAL INPUT TYPE
The parameter shows and sets the type of digital inputs.
Unit of measurement:
Options: NPN
PNP

4.21.9. T.SAMP - Main and Auxiliary input sample time

Acronym
T.SAMP MAIN INPUT SAMPLE TIME
The parameter shows and sets the main and auxiliary input sample time.
Unit of measurement:
Options: 60
120
Scrolling message
Number
Scrolling message
Number
Scrolling message
-
Scrolling message
-
= NPN digital inputs or voltage-free contact
= PNP digital inputs
Scrolling message
Milliseconds
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 149
Submenu Attributes
EN.FUN R W
Submenu Attributes
EN.FUN R W
Submenu Attributes
EN.FUN R W
Submenu Attributes
EN.FUN R W
Submenu Attributes
EN.FUN R W