Cleaning; Troubleshooting - gefran 850 Installation And Instruction Manual

Double pid temperature controller
Table of Contents

Advertisement

8.4.

Cleaning

To clean the faceplate and the case, use only a soft cloth
dampened with water or alcohol. DO NOT use hydrocarbon
solvents (trichloroethylene, gasoline, etc.).
Do not use compressed air to remove dust from the electron-
ic cards. If necessary, use a clean brush with soft bristles.
8.5.

Troubleshooting

The following table shows the most common controller faults and their remedies.
Message or problem
Possible cause
80209C_MHW_850-1650-1850_01-2020_ITA_pag. 262
You can also clean the inside of the controller if necessary.
To do this, first switch off the power supply to the controller
and to the other devices connected to it.
Then slide out the controller as explained in paragraph "8.1.
Replacing the controller" to access and clean the inside of
the case (page 261).
Remedy

Advertisement

Table of Contents
loading

This manual is also suitable for:

16501850

Table of Contents