Pid.n - Pid Configuration; S.tune - Enabling Self-Tuning; Soft.s - Enabling Soft-Start; Soft.t - Soft-Start Time - gefran 850 Installation And Instruction Manual

4.14.2. PID.N – PID Configuration
Acronym
PID.N PID NUMBER
The parameter shows and sets the identifying number of the available PID.
Unit of measurement:
Options: 1...2

4.14.3. S.TUNE - Enabling Self-Tuning

Acronym
S.TUNE PID.1 (or PID.2) SELF TUNING ENABLE
The parameter shows and sets enabling of Self-Tuning.
For more information on the Self-Tuning function, see paragraph "5.10.3. Self-Tuning" on page <?>.
Unit of measurement:
Options: OFF
On
On.AL

4.14.4. SOFT.S - Enabling Soft-Start

Acronym
SOFT.S PID.1 (or PID.2) SOFT START ENABLE
The parameter shows and sets enabling of Soft-Start.
For more information on the Self-Start function, see paragraph "5.9. Soft-Start" on page <?>.
This parameter appears only if S.TUNE = OFF.
Unit of measurement:
Options: OFF
On

4.14.5. SOFT.T - Soft-Start Time

Acronym
SOFT.T PID.1 (or PID.2) SOFT START TIME
The parameter shows and sets Soft-Start time, i.e., the time that the control output needs to reach the value required by
the PID.
This parameter appears only if SOFT.S = On.
Unit of measurement:
Options: 0.0...500.0

4.14.6. A.TUNE - Enabling Auto-Tuning

Acronym
A.TUNE PID.1 (or PID.2) AUTO TUNING ENABLE
The parameter shows and sets enabling of Auto-Tuning.
For more information on the Auto-Tuning function, see paragraph "5.10.4. Auto-Tuning" on page <?>.
Unit of measurement:
Options: OFF
On
Scrolling message
Number
Scrolling message
-
= Self-Tuning disabled
= Self-Tuning enabled at next power-on only
= Self-Tuning enabled at all power-on
Scrolling message
-
= Soft-Start disabled
= Soft-Start enabled at next power-on only
Scrolling message
Minutes
Scrolling message
-
= Auto-Tuning disabled
= Auto-Tuning enabled
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 115
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W