Out1 - Type Of Output 1; Out2 - Type Of Output 2; Out3 - Type Of Output 3; Out4 - Type Of Output 4 - gefran 850 Installation And Instruction Manual

4.4.24. OUT1 - Type of output 1

Acronym
Out1 OUTPUT TYPE
The parameter specifies the type of output 1.
Unit of measurement:
Options: RELAY = Relay output
DIGIT
CONT.A = Continuous output configurable in current and voltage (model 850 only).
CONT.C = Continuous output in current (models 1650 and 1850 only).

4.4.25. OUT2 - Type of output 2

Acronym
Out2 OUTPUT TYPE
If present, the parameter indicates that output 2 is available on the controller and specifies the type.
Unit of measurement:
Options: RELAY = Relay output
DIGIT
MOS

4.4.26. OUT3 - Type of output 3

Acronym
Out3 OUTPUT TYPE
If present, the parameter indicates that output 3 is available on the controller and specifies the type.
Unit of measurement:
Options: RELAY = Relay output
DIGIT
MOS
TRIAC = Triac output (only for model 850)
VT24

4.4.27. OUT4 - Type of output 4

Acronym
Out4 OUTPUT TYPE
If present, the parameter indicates that output 4 is available on the controller and specifies the type.
Unit of measurement:
Options: RELAY = Relay output
DIGIT
TRIAC = Triac output (only for models 1650 and 1850)

4.4.28. OUT1.S - Number of switchings output 1

Acronym
OUT1.S NUMBER X 1000 RELAY CYCLES
If output 1 is relay or logic, the parameter shows the number of switchings (in thousands).
Unit of measurement:
Options: -
Scrolling message
-
= 24 V logic output
Scrolling message
-
= 24 V logic output
= Optomos isolated logic output
Scrolling message
-
= 24 V logic output
= Optomos isolated logic output
= Power supply output for transmitter (models 1650 and 1850 only).
Scrolling message
-
= 24V logic output (model 850 only)
Scrolling message
Number (× 1000)
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 63
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R