4.30.3. MV.STA - Setting mV at start of scale
Acronym
MV.STA
LINRZ.1 (o LINRZ.2) MV START SCALE
The parameter shows and sets the value in millivolts at start of scale if the input is a thermocouple.
The parameter appears only if 32-step linearization has been selected (see paragraph "4.8.5. LIN – Selecting linearization
type" on page <?>)
Unit of measurement:
Options:
-19.99...99.99
4.30.4. MV.FUL - Setting mV at full scale
Acronym
MV.FUL
LINRZ.1 (o LINRZ.2) MV FULL SCALE
The parameter shows and sets the value in millivolts at full scale if the input is a thermocouple.
The parameter appears only if 32-step linearization has been selected (see paragraph "4.8.5. LIN – Selecting linearization
type" on page <?>)
Unit of measurement:
Options:
MV.STA + 1...99.99
4.30.5. MV.50c - Setting mV at temperature of 50 °C
Acronym
MV.50C
LINRZ.1 (o LINRZ.2) MV AT 50 'C
The parameter shows and sets the value in millivolts at 50°C if the input is a thermocouple.
The parameter appears only if 32-step linearization has been selected (see paragraph "4.8.5. LIN – Selecting linearization
type" on page 82)
Unit of measurement:
Options:
-1.999...9.999
Scrolling message
mV
Scrolling message
mV
Scrolling message
mV
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 186
Submenu
Attributes
LINRZ
R W
Submenu
Attributes
LINRZ
R W
Submenu
Attributes
LINRZ
R W