4.4.19. MAC.E – Controller Ethernet Address
Acronym
MAC.E
-
If present, this parameter indicates that the controller has an Ethernet communication module. The parameter shows the
physical MAC address of the Ethernet in the scrolling message.
The information is shown in the format xx-xx-xx-xx-xx-xx.
Unit of measurement:
Options:
-
4.4.20. IO.AUX – Auxiliary digital I/Os available
Acronym
8.I/O
8.I/O EXPANSION AVAILABLE
If present, the parameter indicates that the 8 digital input/output expansion board is installed on the controller (model
1850 only).
Unit of measurement:
Options:
-
4.4.21. IO.RELE – Auxiliary relays available
Acronym
8.RELY
8 RELAY EXPANSION AVAILABLE
If present, the parameter indicates that the 8 relay expansion board is installed on the controller (model 1850 only).
Unit of measurement:
Options:
-
4.4.22. PS.MAI – Sensor power supply available for main input
Acronym
PS.MAI
MAIN SENSOR POWER SUPPLY AVAILABLE
If present, the parameter indicates that the controller has a transmitter power supply on the main input (model 850 only).
Unit of measurement:
Options:
VT1
4.4.23. PS.AUX – Sensor power supply available for auxiliary input
Acronym
PS.AUX
AUX SENSOR POWER SUPPLY AVAILABLE
If present, the parameter indicates that the controller has a transmitter power supply or potentiometer power supply on
the auxiliary input.
Unit of measurement:
Options:
VT2
VP1
Scrolling message
-
Scrolling message
-
Scrolling message
-
Scrolling message
-
= Power supply for 24V transmitter.
Scrolling message
-
= Power supply for 24V transmitter.
= 1V potentiometer power supply.
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 62
Submenu
Attributes
INFO
R
Submenu
Attributes
INFO
R
Submenu
Attributes
INFO
R
Submenu
Attributes
INFO
R
Submenu
Attributes
INFO
R