H.p.hi - Maximum Heating Power; H.p.lo - Minimum Limit Of Heating Power; C.pb - Proportional Cooling Band Or Hysteresis In On-Off Control; C.it - Integral Cooling Time - gefran 850 Installation And Instruction Manual

4.15.6. H.P.HI - Maximum heating power

Acronym
H.P.HI PID.GR.1 (or PID.GR.2...PID.GR.4) HEATING POWER HIGH LIMIT
The parameter shows and sets the maximum limit of heating power.
Unit of measurement:
Options: 0.0...100.0

4.15.7. H.P.LO - Minimum limit of heating power

Acronym
H.P.LO PID.GR.1 (or PID.GR.2...PID.GR.4) HEATING POWER LOW LIMIT
The parameter shows and sets the minimum limit of heating power.
For details, see paragraph "4.13.14. H.P.LO - Minimum limit of heating power" on page 117.
Unit of measurement:
Options: 0.0...100.0

4.15.8. C.PB - Proportional cooling band or hysteresis in ON-OFF control

Acronym
C.PB PID.GR.1 (or PID.GR.2...PID.GR.4) COOLING PROPORTIONAL BAND OR ON/
OFF HYST
The parameter shows and sets the proportional cooling band or hysteresis in the ON-OFF control, calculated as a percent-
age of full scale of the main or auxiliary input.
Unit of measurement:
Options: 0.0...999.9

4.15.9. C.IT - Integral cooling time

Acronym
C.IT PID.GR.1 (or PID.GR.2...PID.GR.4) COOLING INTEGRAL TIME
The parameter shows and sets the integral cooling time.
Unit of measurement:
Options: 0.00...99.99

4.15.10. C.DT - Derivative cooling time

Acronym
C.DT PID.GR.1 (or PID.GR.2...PID.GR.4) COOLING DERIVATIVE TIME
The parameter shows and sets the derivative cooling time.
Unit of measurement:
Options: 0.00...99.99
Scrolling message
%
Scrolling message
%
Scrolling message
%
Scrolling message
Minutes
Scrolling message
Minutes
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 124
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W
Submenu Attributes
PID.GR R W