Par - Selecting Parity; Scanr - Setting Delay Between Two Consecutive Modbus Communications To Slave Nodes In Serial Connection - gefran 850 Installation And Instruction Manual

4.25.3. PAR - Selecting parity

Acronym
PAr PARITY
The parameter shows and sets the parity used in serial communication.
Unit of measurement:
Options: NONE
ODD
EVEN
4.25.4. SCANR - Setting delay between two consecutive Modbus communications to slave
nodes in serial connection
Acronym
SCANR SCAN RATE MODBUS MASTER
This parameter shows and sets the delay, in milliseconds, between two consecutive modbus communications toward
known slaves in serial connections.
The parameter only appears if the Modbus TCP option is available.
Unit of measurement:
Options: 0...9999
Scrolling message
-
= No parity
= Odd parity
= Even parity
Scrolling message
ms
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 164
Submenu Attributes
SERIA R W
Submenu Attributes
SERIA R W