Timer - Timer Value; Msg.tm - Selecting Message Assigned To End Of Count - gefran 850 Installation And Instruction Manual

4.23.10. TIMER - Timer value

Acronym
TIMER TIMER.1 (o TIMER.2) ACTUAL TIME
The parameter shows and sets the timer value.
Unit of measurement:
Options: 0...9999

4.23.11. MSG.TM - Selecting message assigned to end of count

Acronym
MSG.TM TIMER.1 (o TIMER.2) MSG NUMBER WHEN TIMER OVER
The parameter shows and sets the number of the message assigned to end of count condition of the timer, i.e. the scrol-
led message seen on the display.
For more information on scrolling messages, see paragraph "3.1.2.2. Scrolling messages" on page <?>.
If the parameter is set to "0" no message will be displayed at the end of the timer count.
Unit of measurement:
Options: 0...25 (with LAnG=LANG1 or LANG2 or LANG3)
0...75 (with LAnG=NONE)
Scrolling message
Minutes or Seconds according to the selection set in the MODE submenu, parameter tMEr
Scrolling message
Message number
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 159
Submenu Attributes
TIMER R W
Submenu Attributes
TIMER R W