Day - Setting Day Of Week; Date - Setting Day; Mont - Setting Month; Year - Setting Year - gefran 850 Installation And Instruction Manual

4.31.10. DAY - Setting day of week

Acronym
dAY
The parameter shows and sets the day of the week on the Real Time Clock, if U.CAL = RTC.
Unit of measurement:
Options: MONDA...SUNDA

4.31.11. DATE - Setting day

Acronym
DATE
The parameter shows and sets the day on the Real Time Clock, if U.CAL = RTC
Unit of measurement:
Options: 1...31

4.31.12. MONT - Setting month

Acronym
Mont
The parameter shows and sets the month on the Real Time Clock, if U.CAL = RTC.
Unit of measurement:
Options: JANUA...DECEM

4.31.13. YEAR - Setting year

Acronym
YEAR
The parameter shows and sets the year on the Real Time Clock, if U.CAL = RTC.
Unit of measurement:
Options: 0...99

4.31.14. C.LO - Setting analog output minimum

Acronym
C.LO
The parameter shows and sets the minimum analog output value.
You can change the displayed value with the
To check the real voltage/current value on the output during calibration, measure it with a voltmeter/ammeter
Unit of measurement:
Options: 0...65535
Scrolling message
Day of week
Scrolling message
Number of day
Scrolling message
Mese
Scrolling message
Anno
Scrolling message
and
Converter points
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 191
keys.
Submenu Attributes
US.CAL R W
Submenu Attributes
US.CAL R W
Submenu Attributes
US.CAL R W
Submenu Attributes
US.CAL R W
Submenu Attributes
US.CAL R W