Out4.S - Number Of Switchings Output 3; T.days - Total Working Days; P.days - Partial Working Days; T.int - Internal Temperature Of Controller - gefran 650 Abbreviated Manual

4.4.21. OUT4.S - Number of switchings output 3

Acronym
OUT4.S NUMBER X 1000 RELAY CYCLES
If output 4 is available on the controller, the parameter shows the number of switchings (in thousands).
Unit of measurement:
Options:

4.4.22. T.DAYS - Total working days

Acronym
T.DAYS TOTAL DAYS OF OPERATION
The parameter shows total number of working days of the controller since first power-on. Each working day equals 24
hours of actual functioning.
Unit of measurement:
Options:

4.4.23. P.DAYS - Partial working days

Acronym
P.DAYS PARTIAL DAYS OF OPERATION
The parameter shows the number of working days of the controller since the last counter reset, Each working day equals
24 hours of actual functioning.
The counter can be reset with the Us.cal function.
Unit of measurement:
Options:

4.4.24. T.INT - Internal temperature of controller

Acronym
T.INT INTERNAL TEMPERATURE
The parameter shows the instantaneous internal temperature of the controller.
Unit of measurement:
Options:

4.4.25. T.MIN - Minimum internal temperature of the controller

Acronym
T.MIN MIN INTERNAL TEMPERATURE
The parameter shows the minimum internal temperature of the controller measured during work.
Unit of measurement:
Options:
40524-04 Rev0
Gefran 650/1250/1350 Temperature Controller – Abbreviated Manual
Scrolling message
Number (× 1000)
-
Scrolling message
Day
0...9999
Scrolling message
Day
0...9999
Scrolling message
°C
-
Scrolling message
°C
-
4. CONFIGURATION
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
51