4.15.1. PID.N - Selecting PID for parameters to be configured
Acronym
PID.N
PID NUMBER
The parameter shows and sets the identifying number of the available PID.
Unit of measurement:
Options:
1...2
4.15.2. PID.G.N - Selecting PID for parameters group to be configured
Acronym
PID.G.N
PID PARAMETERS GROUP NUMBER
The parameter shows and sets the parameter group to be configured, identified by its number.
Unit of measurement:
Options:
1...PD.G.N
4.15.3. H.PB - Proportional heating band or hysteresis in ON-OFF control
Acronym
H.PB
PID.GR.1 (or PID.GR.2...PID.GR.4) HEATING PROPORTIONAL BAND OR ON/
OFF HYST
The parameter shows and sets the proportional heating band or hysteresis in the ON-OFF control, calculated as a per-
centage of full scale of the main or auxiliary input.
Unit of measurement:
Options:
0.0...999.9
4.15.4. H.IT - Integral heating time
Acronym
H.IT
PID.GR.1 (or PID.GR.2...PID.GR.4) HEATING INTEGRAL TIME
The parameter shows and sets the integral heating time.
Unit of measurement:
Options:
0.00...99.99
4.15.5. H.DT - Derivative heating time
Acronym
H.DT
PID.GR.1 (or PID.GR.2...PID.GR.4) HEATING DERIVATIVE TIME
The parameter shows and sets the derivative heating time.
Unit of measurement:
Options:
0.00...99.99
Scrolling message
Number
Scrolling message
Number
= Numerical identification where PID.G.N is the total number of groups of parameters
set on the MODE submenu
Scrolling message
%
Scrolling message
Minutes
Scrolling message
Minutes
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 123
Submenu
Attributes
PID.GR
R W
Submenu
Attributes
PID.GR
R W
Submenu
Attributes
PID.GR
R W
Submenu
Attributes
PID.GR
R W
Submenu
Attributes
PID.GR
R W