4.29.3. X1 - Abscissa of first linearisation point
Acronym
X1
LIN.4.P.1 (0 LIN.4.P.2 o LIN.4.P.3) CUSTOM 4 POINT LINEARIZATION STEP
This parameter permits setting of the abscissa of the first linearisation point in the four points. If the RD.ADJ option is
active (parameter Md.4P), an editable value will be displayed, while if the CALIB option is active, the value of the corre-
sponding input is displayed, which may be edited with a calibrator or related instrument.
Unit of measurement:
Options:
-1999..9999
4.29.4. Y1- Ordinate of the first 4-point linearisation point
Acronym
Y1
LIN.4.P.1 (0 LIN.4.P.2 o LIN.4.P.3) CUSTOM 4 POINT LINEARIZATION STEP
This parameter may be used to set the ordinate of the first 4-point linearisation point.
Unit of measurement:
Options:
-1999..9999
4.29.5. X2 - Abscissa of second linearisation point
Acronym
X2
LIN.4.P.1 (0 LIN.4.P.2 o LIN.4.P.3) CUSTOM 4 POINT LINEARIZATION STEP
This parameter permits setting of the abscissa of the second linearisation point in the four points.
Unit of measurement:
Options:
-1999..9999
4.29.6. Y2- Ordinate of the second 4-point linearisation point
Acronym
Y2
LIN.4.P.1 (0 LIN.4.P.2 o LIN.4.P.3) CUSTOM 4 POINT LINEARIZATION STEP
This parameter may be used to set the ordinate of the second 4-point linearisation point.
Unit of measurement:
Options:
-1999..9999
Scrolling message
Points on the scale
Scrolling message
Points on the scale
Scrolling message
Points on the scale
Scrolling message
Points on the scale
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 184
Submenu
Attributes
LIN.4.P
RW
Submenu
Attributes
LIN.4.P
RW
Submenu
Attributes
LIN.4.P
RW
Submenu
Attributes
LIN.4.P
RW