Pr.num; Pr.st.n - Programming Step; St.end - End Step Of The Program Configuration; Refe - Step Reference Programmer - gefran 850 Installation And Instruction Manual

4.8.1.

PR.NUM

Acronym
PR.NUM PROGRAMMER ACTUAL PROGRAM
This parameter shows and sets the program number that you intend to modify. Appears only if "Simplified Programmer"
mode is selected - parameter S.PROG = ON).
Unit of measurement:
Options: 1...12
4.8.2.

PR.ST.N - Programming step

Acronym
PR.ST.N PROGRAMMER ACTUAL STEP
The parameter shows and sets the number of the programming step being configured. Appears only if simplified pro-
gramming mode is selected.
Unit of measurement:
Options: 1...192 if S.PROG = OFF; 16 if S.PROG = ON ("Simplified Programmer" mode)
4.8.3.

ST.END - End step of the program configuration

Acronym
ST.END PR.STP.1 (o PR.STP.2...PR.STP.192) END STEP OF THE PROGRAM se mo-
dalità "Programmatore semplificato" disattiva; (o PR.STP.1...PR.STP.16) END
STEP OF THE PROGRAM se modalità "Programmatore semplificato" attiva)
This parameter shows and sets the current step as the last step in the program selected by the PR.NUM. parameter.
Appears only if simplified programming mode is selected.
Unit of measurement:
Options: No
YES
4.8.4. REFE – Step reference programmer
Acronym
rEFE REFERENCE PROGRAMMER
The parameter shows and sets the step reference programmer.
Unit of measurement:
Options: BOTH
PROG1 = Programmer 1 only
PROG2 = Programmer 2 only
4.8.5.

SETP - Programming step setpoint

Acronym
SETP PR.STP.1 (o PR.STP.2...PR.STP.192) SETPOINT se modalità"Programmatore
semplificato"disattiva; o PR.STP.1...PR.STP.16 SETPOINT se modalità"Prog-
rammatore semplificato"attiva.
The parameter shows and sets the setpoint for the current programming step.
Unit of measurement:
Options: -1999...9999
Scrolling message
Program number
Scrolling message
Number step
Scrolling message
-
= the current step is not the last in the program selected by the PR.NUM parameter
= the current step is the last in the program selected by the PR.NUM parameter
Scrolling message
Step number
= Entrambi I programmatori
Scrolling message
°C, °F, % based on chosen scale
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 76
Submenu Attributes
PR.STP R W
Submenu Attributes
PR.STP R W
Submenu Attributes
PR.STP R W
Submenu Attributes
PR.STP R W
Submenu Attributes
PR.STP R W