First Power-On; Fast Configuration - gefran 850 Installation And Instruction Manual

3.3.

First power-on

At first power-on, after the controller has run the self-diagnostics test, press the
The parameters shown are a subset of all the controller parameters and let you rapidly configure the inputs and outputs.
The number and type of the parameters shown depends on the controller HW configuration and on the choices made with
the parameters previously shown.
For example, minimum and maximum scale limits are shown only if you have chosen an mA or V type temperature sensor.
Fast Configuration also appears if the HMI menu is set to parameter QuiCk = On
Fast configuration is not enabled at first power-on with programmer or valve model, and is not present when the optional
auxiliary input is available.
3.3.1.

Fast configuration

> 2 s
> 2 s
> 2 s
A
Raises the value
Lowers the value
Raises the value
Lowers the value
A
80209C_MHW_850-1650-1850_20-2020_ENG_pag. 45
key to access the Fast Configuration Menu.
Home
Selecting sensor type
Selecting unit of measurement
The unit of measurement can be °C or °F
only if a TC or Rtd sensor is selected.
Minimum scale limit
Only if the selected sensor is in mV or V, the scale
limits LO.SCL, HI.SCL and the settable limits of
the LO.SP, HI.SP setpoint for TC or RTD sensors
are automatically set according to sensor type and
unit of measurement.
Maximum scale limit
Only if the selected sensor is in mV or V.