4.4.1.
SW.VER - Software version
Acronym
SW.VER
SOFTWARE VERSION
The parameter shows the version (major.minor) of the controller software.
Unit of measurement:
Options:
-
4.4.2.
CODE - Identifying code of controller
Acronym
CODE
INSTRUMENT ID CODE FOR SERIAL COMM
The parameter shows identifying code of the device for serial communication.
Unit of measurement:
Options:
0...247
4.4.3.
ERR.1 - Main input error
Acronym
ERR.1
INPUT ERROR
The parameter shows error detected by the main input.
Unit of measurement:
Options:
Lou
HIGH
Err
Sbr
ECAL
EAdC
4.4.4.
ERR.2 - Auxiliary input error
Acronym
ERR.2
INPUT ERROR
The parameter displays the error (if present) detected on the optional auxiliary input (if available).
Unit of measurement:
Options:
Lou
HIGH
Err
Sbr
ECAL
EAdC
Scrolling message
-
Scrolling message
-
Scrolling message
-
= Value below minimum scale limit
= Value above maximum scale limit
= PT100 in short circuit or value below minimum limit
(for example TC with wrong connection)
= Sensor break or value above maximum limit
= Calibration error
= AD converter error
Scrolling message
-
= Value below minimum scale limit
= Value above maximum scale limit
= PT100 in short circuit or value below minimum limit
(for example TC with wrong connection)
= Sensor break or value above maximum limit
= Calibration error
= AD converter error
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 58
Submenu
Attributes
INFO
R
Submenu
Attributes
INFO
R
Submenu
Attributes
INFO
R
Submenu
Attributes
INFO
R