4.15.11. C.P.HI - Maximum limit of cooling power
Acronym
C.P.HI
PID.GR.1 (or PID.GR.2...PID.GR.4) COOLING POWER HIGH LIMIT
The parameter shows and sets the maximum limit of cooling power.
Unit of measurement:
Options:
0.0...100.0
4.15.12. C.P.LO - Minimum limit of cooling power
Acronym
C.P.LO
PID.GR.1 (or PID.GR.2...PID.GR.4) COOLING POWER LOW LIMIT
The parameter shows and sets the minimum limit of cooling power.
For details, see paragraph "4.13.21. C.P.LO - Minimum limit of cooling power" on page 119.
Unit of measurement:
Options:
0.0...100.0
4.15.13. PV.THR - Threshold PV for the activation of the group of PID parameters
Acronym
PV.THR
PID.GR.1 (or PID.GR.2...PID.GR.4) PV BEYOND WHICH THE GROUP IS ACTIVE
The parameter shows and sets the PV over which the group of PID parameters is active.
The parameter is shown only if the respective programmer is not enabled.
Unit of measurement:
Options:
LO.SCL...HI.SCL
Scrolling message
%
Scrolling message
%
Scrolling message
Scale points of main or auxiliary input
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 125
Submenu
Attributes
PID.GR
R W
Submenu
Attributes
PID.GR
R W
Submenu
Attributes
PID.GR
R W