Refe - Selecting The Alarm Reference - gefran 850 Installation And Instruction Manual

4.11.3. REFE - Selecting the alarm reference

Acronym
REFE ALARM.1 (o ALARM.2...ALARM.4) SELECTING REFERENCE SIGNAL
The parameter shows and sets the reference of alarm number "x" selected with the previous parameter ALARM, where
the reference can be an input or value to be monitored.
Unit of measurement:
Options: PV1
if model with auxiliary input:
IN2
SSP1
if model with CT1+CT2:
CURR1 = Current of current transformer CT1
CURR2 = Current of current transformer CT2
if energy count function is enabled in MODE.1:
OU.KW1 = Power transferred to the load ENERG.1
O.KWH1 = Energy transferred to load ENERG.1
E.KWH1 = Totalizer of energy transferred to load ENERG.1
T.INT
IN1
P.DAYS = Partial working days
if PID2.E function is enabled in EN.FUN:
PV2
SSP2
if energy count function is enabled in MODE.2:
OU.KW2 = Power transferred to load ENERG.2
O.KWH2 = Energy transferred to load ENERG.2
E.KWH2 = Totalizer of energy transferred to load ENERG.2
if model with auxiliary input 2:
IN3
if model with Master Modbus serial and Master parameter configured::
MAS.01 = Master Value 1
MAS.02 = Master Value 2
MAS.03 = Master Value 3
MAS.04 = Master Value 4
MAS.05 = Master Value 5
MAS.06 = Master Value 6
MAS.07 = Master Value 7
MAS.08 = Master Value 8
MAS.09 = Master Value 9
MAS.10 = Master Value 10
MAS.11 = Master Value 11
MAS.12 = Master Value 12
MAS.13 = Master Value 13
MAS.14 = Master Value 14
MAS.15 = Master Value 15
MAS.16 = Master Value 16
MAS.17 = Master Value 17
MAS.18 = Master Value 18
MAS.19 = Master Value 19
MAS.20 = Master Value 20
Scrolling message
-
= Process variable for PID.1
= Auxiliary input
= Active Setpoint for PID.1
= Temperatura interna
= Main input
= Process variable PID.2
= Active Setpoint for PID.2
= Auxiliary input 2
80209C_MHW_850-1650-1850_02-2020_ENG_pag. 101
Submenu Attributes
ALARM R W