Storage Devices; Hard Disk Drive - Sun Microsystems SPARCstation 4 Service Manual

9
C H A P T E R

Storage Devices

This chapter includes information about how to remove and replace the system's
internal storage devices and related cables.
"Hard Disk Drive" on page 1
"CD-ROM Drive" on page 4
"Diskette Drive" on page 8
"CD-ROM SCSI Cable" on page 15
"DC Power Harness" on page 18
"Diskette Data Cable" on page 19
"CD-ROM Audio Cable" on page 21
Note – The information in this chapter applies only to a SPARCstation 4 system; it
does not apply to a SPARC Xterminal 1 system.
9.1

Hard Disk Drive

The SPARCstation 4 system accommodates one internal 545-Mbyte or 1.05-Gbyte
hard disk drive mounted in the on-board disk drive bracket. A specially designed
handle, fastened to the drive, speeds drive removal and installation.
Both types of drive connect via a SCSI ribbon cable to a SCSI data connector on the
system board (see
board.
Note – Do not remove the handle from the hard drive. It is part of the field
replaceable unit (FRU).
FIGURE 9-1
on page 10-2). The SCSI is terminated on the system
FIGURE 10-1
shows the location of the drive.
9-1