Sun StorEdge MultiPack Disks
All Sun StorEdge MultiPack disks are single connector disks; they eliminate interior
cables and disk drive ID jumpers, and so reduce the SCSI bus length. In addition,
disk replacement is simple. See Chapter 3, "Parts Replacement," for instructions on
how to replace a drive.
™
Refer to the Solaris
Handbook for SMCC Peripherals appropriate to your particular
system software for information on setting up the disk drives.
Refer to the AnswerBook on-line documentation that came with your operating
system for more information.
Sun StorEdge MultiPack Addresses
When you connect a Sun StorEdge MultiPack unit to your system, you must choose
either SCSI addresses 1–6 or SCSI addresses 9–14 for your drives. (
).
FIGURE 1-3
Sun StorEdge MultiPack Unit
FIGURE 1-2
The SCSI ID address switch is on the back of the enclosure (
HI
9
12
LO
1
4
HI
10
13
LO
2
5
HI
11
14
LO
3
6
Chapter 1
and
FIGURE 1-2
).
FIGURE 1-3
Installation Considerations
25