Creating A New Project - Siemens SINUMERIK 840DiE sl Manual

9 Drive Commissioning (SINAMICS)
9.2 ONLINE commissioning
9.2.1

Creating a new project

Execution
9-244
Perform the following actions to create a new project:
1. Start the STARTER drive commissioning tool using the icon on the user in-
terface or the Windows taskbar: Start > SIMATIC > STEP 7 > STARTER).
If the Project Wizard for creating a new project is not opened automatically
when initiating the STARTER, open it using menu command: Project > New
with Wizard
Then click button: "Find drive units online".
STARTER Project Wizard
1.
Introduction Create a
new project
2. Enter the desired project data. You can enter any of the data.
Then click button: "Next>"
STARTER Project Wizard
1.
Introduction Create a
new project
3. Set the PG/PC interface if required and test whether all SINAMICS drive
units connected to the PROFIBUS which are to be commissioned as part of
this project are accessible via the PG/PC interface. To proceed to the next
dialog box click the button: "Change and test...".
2. 3.
Set PG/PC Insert Summary
interface drive
device
Compile
drive units offline...
Find drive units
online...
Open existing project
(offline)...
Display Wizard at start–up
Cancel
2. 3.
Set PG/PC Insert
interface drive
device
Please enter the desired project data:
Project name: Project|
Author:
Comment
< Back Continue >
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007
4.
4.
Summary
Cancel