Creating The Drive Project Online; Requirements - Siemens SINAMICS S110 Getting Started

Creating the drive project ONLINE

3.1 Creating the drive project ONLINE
The following steps are required to create a drive object ONLINE:
Table 3- 1
Step
1
2
3
4
5
3.2

Requirements

The following prerequisites for creating a drive project ONLINE by means of the STARTER
commissioning tool must be fulfilled:
● The components are assembled (see chapter 2).
● The drive unit has been switched on in accordance with regulations.
● Control Unit CU305 is connected to a PG/PC.
● The STARTER commissioning tool has been called up on the PG/PC.
Getting Started
Function Manual, 10/2008, 6SL3097-4AG10-0BP0
Creating a project ONLINE
Activity
Ensure that the commissioning requirements are fulfilled.
Create a project with the help of a Wizard.
Carry out an ONLINE search for DRIVE-CLiQ stations.
Transfer the configuration to the PG/PC.
Operate the motor using the "control panel" in STARTER (motor rotating).
3
15