Electrical Design - Siemens SINUMERIK 840DiE sl Manual

3 Design

3.2 Electrical design

3.2 Electrical design
3.2.1 MCI board and PROFIBUS DP
1)
Only the PLC has access to PROFIBUS DP (2), interface X102.
Therefore no drives and no I/Os of the NC can
be operated via this PROFIBUS line.
Alternatively also parameterizable as an MPI bus.
X102
1)
X101
MCI board
X126
SINAMICS S120
Alternative:
SIMODRIVE 611 universal
with optional module: MotionControl
with PROFIBUS DP
Fig. 3-5 SINUMERIK 840Di sl MCI board and PROFIBUS DP components
3-98
Pushbutton Panel
MPP 438H
Machine control panel
MCP 310
Machine control panel
MCP 483
Diagnostic repeater
for PROFIBUS DP
X2
SIMATIC DP ET200
X2
I/O Module PP72/48
X2
ADI4
PG/PC e.g.
SIMATIC Power PG
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007