O Module Pp72/48 - Siemens SINUMERIK 840DiE sl Manual

01/2007
2.11 I/O module PP72/48
2.11.1 Module
X2: PROFIBUS
X1: Power Supply
Fig. 2-20 I/O module PP72/48
Order number
Features
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
LED: POWER
X333
Digital inputs/outputs
(50–pin ribbon cable
Designation
I/O module PP72/48
I/O module PP72/48 is a simple module (without a separate housing) for con-
necting digital input/outputs as part of an automation system based on
PROFIBUS DP.
The module has the following important features:
S
PROFIBUS DP connection (max. 12 MBaud)
S
72 digital inputs and 48 digital outputs
S
Onboard status display by means of 4 diagnostic LEDs
To power the module and the digital outputs, an external power supply source
(+24 V DC) is required.
2 Hardware Descriptions
2.11 I/O module PP72/48
S1: DIL switch for setting the
PROFIBUS address
LED: OVTEMP
LED: READY
8
1
ON
OFF
X222
connector)
Order No. (MLFB)
6FC5 611–0CA01–0AA0
LED: EXCHANGE
X111
2-79