Setting The Boot Response For The Service Desktop - Siemens SINUMERIK 840DiE sl Manual

01/2007
5.4.3

Setting the boot response for the Service Desktop

5.4.4 System information after "Fatal exceptional error"
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
S
Folder: SINUMERIK 840Di > tools
– HT8TCU
Activation of the transfer of an HT8 machine control panel signal
References
/IAM2/ CNC Commissioning Part 5
Section: Thin Client Configuration (IM5)
– Install/uninstall MCIS RCS Host
Installation and uninstall program of the host for remote diagnostics of
SINUMERIK systems with Windows–based HMI within the framework of
the Motion Control Information System.
References
Catalog NC 61: Motion Control Information System (MCIS)
S
Folder: SinuCom NC
– CT Editor
Tool for creating test templates
– NC Connect Wizard
Tool for establishing the communications link from SinuCom NC to
SINUMERIK 840Di sl.
– SinuCom NC
Note
When Windows starts up, the SINUMERIK 840Di sl NCK system software is
automatically started in the background.
The NC or MHI desktop settings are used to determine if the NC–desktop
(Windows desktop) is displayed after booting the SINUMERIK 840Di sl, or if
the HMI user interface, e.g. HMI Advanced, is started immediately:
S
NC desktop
HMI application autostart: OFF
S
HMI desktop
HMI application autostart: ON
After a "fatal exception error" (blue screen), system information is written to the
following file:
S
D:\Memory.dmp.
5 Power On and Power–Up
Configure system network
Configure HT 8 in the system network
5.4 Service Desktop
5-119