Siemens SINUMERIK 840DiE sl Manual page 254

9 Drive Commissioning (SINAMICS)
9.2 ONLINE commissioning
9-254
The corresponding DRIVE–CliQ topology in the STARTER must appear as
follows:
Topology tree
Control_Unit (1)
Infeed.Infeed (2)
Unassigned
Unassigned
Drive_1.Power_Module_1 (3)
[Drive_2|Drive_3].Power_Module_2 (6|8)
Drive_1.SM_to_Motor_1 (7)
Unassigned
Unassigned
Unassigned
Component folder
Unassigned
Filter: DRIVE CliQ + Option Slot
Note
Differences must be corrected manually. Click the appropriate component then,
keeping the left–hand mouse button depressed, drag it to the correct
connection. If the connection is already assigned, you can use a free
connection in the topology or the component folder as a buffer.
Project setpoint Set
Unassigned
Drive_2.SM_to_Motor_2 (9)
Drive_3.SM_to_Motor_3 (15)
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007
If Comparison