Automation License Manager - Siemens SINUMERIK 840DiE sl Manual

01/2007
17.1.4

Automation License Manager

17.1.5 License database
License database
access
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
Via the Automation License Manager, individual licenses can be assigned and
the automatic assignment of all the licenses required for a piece of hardware
can be carried out (license requirement alignment). The transfer of the license
information including the License Key occurs electronically via Ethernet.
Preconditions:
S
The Automation License Manager must be installed on the computer
(PC/PG) that is used to assign the licenses to the hardware.
S
The computer (PC/PG) must be able to connect to the license database and
the SINUMERIK control system via Ethernet link (TCP/IP):
– License database: Internet connection
– SINUMERIK control system: Intranet or PTP connection (Ethernet,
Peer–To–Peer)
The license database contains all the customer–specific, relevant license informa-
tion for the license management of SINUMERIK software products. The central
management of the license information in the license database ensures that the
existing license information regarding a piece of hardware is always up to date.
The following functions are available:
S
Management of the hardware purchased with the related licenses assigned
S
Management of the licenses purchased and not yet assigned to any hard-
ware
S
Assignment of licenses to a piece of hardware according to the current li-
cense requirement (license requirement alignment)
S
Assignment of individual licenses to a piece of hardware
S
Generating license keys
S
Transferring license information including the License Key into a control
system
License database access occurs via:
S
Direct access
The direct access occurs with:
– Delivery note number
– License number
17 License Management
17.1 Fundamentals
17-479