Siemens SINUMERIK 840DiE sl Manual page 249

01/2007
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) - - 01/2007 Edition
-- The following note lists the drives that require offline motor configuration
because the corresponding data cannot be determined online. Confirm
with OK.
Note
Motors with DRIVE CliQ interfaces do not require subsequent offline con-
figuration as the appropriate parameters can be determined online by
the STARTER.
-- Finally in the dialog box "Automatic configuration" click the button:
"Close".
4. Go offline before configuring the motors and encoder (see next section).
To do this click the button: "Disconnect from target system".
STARTER - - Project
Project Edit Target System View Tools Window Help
Project
Add individual drive
Drive_Unit_Addr10
Automatic configuration
Overview Overview
Configuration
Topology
Control_Unit
Infeed
Input/Output components
Drives
Inserting drives
Drive_1
Drive_2
Drive_3
9 Drive Commissioning (SINAMICS)
9.2 ONLINE commissioning
9-249