Checking An Ethernet Connection - Siemens SINUMERIK 840DiE sl Manual

7 Ethernet Communication
7.1 General
7.1.3

Checking an Ethernet connection

7-162
If there is an Ethernet connection between a SINUMERIK 840Di sl PCU with a
direct operator panel connection and another component, the connection can
be checked as followed:
1. Start a Windows console on the PCU: Windows XP Start menu: Start >
Run: cmd
2. On the console, enter the command "ping" followed by the IP address of the
component.
Example: ping 192.168.214.192
– Positive reply:
– Negative reply:
"Reply from 192.168.214.192: . . . ."
"Request timed out . . . ."
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007