Ethernet Communication - Siemens SINUMERIK 840DiE sl Manual

Ethernet Communication

7.1 General
7.1.1 Ethernet PCU connections 50.3
Ethernet 1
Ethernet 2
7.1.2 Determining the PCU Ethernet communication parameters
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
Ethernet 1
(company network)
Ethernet 2
(system network)
Fig. 7-1 Ethernet connections of the PCU 50.3
The PCU 50.3 has 2 Ethernet connections (10/100 MBaud):
S
Ethernet 1 (company network)
S
Ethernet 2 (system network)
The interface "Ethernet 1" is preset as a SINUMERIK DHCP client for connect-
ing to a company network or a PTP connection.
The interface "Ethernet 2" is preset as a SINUMERIK DHCP server for connect-
ing to a system network with IP address 192.168.214.241.
The Ethernet components described below, e.g. Machine control panel MCP
483 IE, are connected via this Ethernet interface.
Start a Windows console on the PCU to determine the Ethernet communication
parameters of the PCU: Windows XP Start menu: Start > Run: cmd. On the
console, enter the command ipconfig.
PCU 50.3
7
7-161